Author: Jared Jennings

Why You Need an AC Service

Jared Jennings HVAC , , , , ,

Many homeowners can perform maintenance on their air conditioning systems, such as changing air filters and clearing debris around the outdoor unit. However, a professional AC Service Naples FL will ensure that your system operates effectively and efficiently.

AC Service

A technician will look at the thermostat, checking to make sure the cooling transmission is working properly. They will also inspect the evaporator for bent or damaged fins and wash the condenser, if needed.

Your air conditioning system depends on a delicate balance of chemicals to function properly. The main one is refrigerant, which absorbs heat from your home and then releases it outdoors in a continuous cycle. Low levels of this essential chemical can damage your AC unit and cause it to operate inefficiently. The good news is that you can check refrigerant levels in just a few steps, although it’s always better to leave this task to an experienced professional.

Before beginning, make sure to shut off power to your air conditioner at the circuit breaker box and wear protective gloves and eyewear for safety reasons. Then, locate the service valves on your air conditioner and remove their caps. Connect the blue (low-pressure) hose to the suction line and the red (high-pressure) hose to the discharge line, which will give you an idea of your current refrigerant levels. You can also use manifold gauges that are specifically designed for measuring refrigerant, which are available at hardware stores.

Start by determining what type of refrigerant your unit uses, which you can find on the type plate that is located near the compressor. Then, evaluate the pressure of the refrigerant using a gauge that can show high and low readings as well as evaporation and condensation temperatures. If the pressure readings are significantly higher than the recommended range, it indicates that your system is overcharged. If they are lower, your refrigerant is low.

If your refrigerant levels are too low, the air conditioner will have to work harder to cool your home, which results in a higher energy bill and faster wear and tear on the system. It’s also more likely to develop a leak or other problems that can be very costly in the long run. This is why it’s important to schedule an ac service session with a professional right away if you suspect your refrigerant level may be low. They can check the level and recharge it for you quickly and easily. This will save you money and keep your air conditioner operating efficiently throughout the summertime.

Condenser

The air conditioning system uses a series of processes to transfer heat from your house. The condenser, which works with the compressor, is one of those processes. The condenser takes the latent heat absorbed by the refrigerant and releases it into the outside air. Without the condenser, the air conditioner wouldn’t be able to cool your home.

A problem with the condenser can cause a variety of issues. One is high energy bills because the system has to work harder and longer to cool the house. Another is a lack of cold air because the condenser can’t disperse the latent heat.

In a standard central AC system, the condenser is located in the back or side of your home. The condenser unit contains the compressor, evaporator coils and condenser fan. A packaged AC system has a different configuration, but it typically has all the same components.

The condenser is usually covered with a metal cage, which protects it from damage and debris. The coils can be clogged with dirt or dust. In addition, the fan might not be able to spin because of a motor problem. A technician can clean the coils and check on the fan’s condition during ac service.

During this process, the technician will also inspect the capacitor to ensure it is closed and working properly. The capacitor provides electricity to the condenser fan and compressor. If it is open or corroded, the ac won’t start.

The condenser has thin wavy wires that run up the sides of it. If these get bent, they might block the coils and prevent the latent heat from being released. A technician can straighten them, which will help the air flow through the coils and cool the house. In addition, the technician might need to replace a part called the compressor contactor. This is an electrical switch that helps the condenser fan and compressor motor turn on and off. The switch must stay closed to allow electricity to flow through it, but if it opens or shuts too often, it could damage the moving parts.

Evaporator

The evaporator coil, although small in size, plays a major role in your AC system’s effectiveness and longevity. This essential component absorbs the heat in the air and evaporates it, resulting in cool air that is circulated throughout your home. Keeping the evaporator coil clean is critical for optimal performance and longevity. Unfortunately, a clogged evaporator coil can lead to many problems, including reduced cooling capacity and an obnoxious smell. In this post, we will take a closer look at the evaporator coil and how to keep it in pristine condition.

Your car’s evaporator coil is located beneath the dashboard and is very cold when your vehicle is in operation. Warm air that passes over the cold metal of the coil gets cooled as it is absorbed by the refrigerant in the evaporator. The cool air is then passed into the cabin via a blower fan and your passengers can enjoy the cooling effects of the evaporator coil.

During this process, the evaporator coil becomes covered in condensation that drips onto a drain tube and is directed away from the unit. If this drain tube becomes blocked, moisture can build up on the evaporator coils and create a puddle underneath your car. This is normal and not a reason to worry.

As the refrigerant flows through your air conditioning system, it first enters the evaporator via an expansion valve. It then passes through a long blue section that is saturated with a mix of liquid and gas. This mixture has a constant temperature and is able to absorb the heat from the conditioned air that comes into contact with it. This enables the evaporator to quickly and efficiently cool your home.

The evaporator coil, like any other part of your air conditioner, needs regular maintenance to prevent damage. Dirt and dust can clog the coil, inhibiting its ability to transfer heat effectively. To ensure the best performance, this coil should be cleaned regularly by an experienced ac technician. The evaporator is not something you should attempt to replace on your own as it contains refrigerant, so it will need to be replaced by an expert.

Thermostat

The thermostat is the brain of your AC system, sending signals to turn on or off the compressor to achieve your desired indoor temperature. Whether you have a manual, programmable, or smart thermostat, understanding how it works can help you set it correctly and enjoy the best comfort possible for your home.

A poorly-set thermostat can make your AC work harder than it needs to, which can lead to high energy bills and increased wear and tear on the system. An ac service technician can check the settings on your thermostat and correct any issues that might be causing it to run inefficiently.

Choosing the right thermostat mode is a delicate balance between personal comfort and energy efficiency. Too low and you might not feel comfortable; too high, and you’ll be wasting money on unnecessary air conditioning use. An ac service professional can help you find the perfect setting to fit your lifestyle and budget.

Your thermostat uses a basic principle of thermodynamics to measure the ambient temperature and determine whether or not your system should be turned on. When the room gets warmer, a metal strip inside your thermostat expands and pushes a lever that turns the system on or off. When the air is cooler, the metal strip contracts and the switch reverses. This process repeats until the thermostat senses that the temperature is at your preferred level.

If your home has a programmable thermostat, you can program it to automatically turn on and off at specific times of the day. Then, each time you leave and return home, the thermostat will adjust to a more comfortable temperature while saving energy at the same time. If your schedule is different on weekends, you can create a separate program for those days as well. Some programmable thermostats even have hold and vacation modes that let you keep the same temperature while you’re away for long periods of time.

If your thermostat isn’t working at all, there could be a problem with the circuit breaker or fuse associated with it. If this is the case, you’ll need to reset or replace it. You’ll also want to check the thermostat’s battery to ensure it has enough power.

Drain Cleaning Is Essential Preventative Maintenance

Jared Jennings Plumbing , , , , , ,

Drain Cleaning Houston is an essential preventative maintenance task to reduce clogs, foul odors and other plumbing problems. Clogged drains are a leading cause of bacteria in our homes due to food, soap scum, paper products and other materials that should never be in our drain lines.

Drain Cleaning

Foul odors are also caused by stagnant water that attracts pests like flies, mosquitoes and roaches looking for a moist and dark environment to thrive in.

Clogged drains are common problems that can be difficult to deal with. When a drain gets backed up with organic waste, such as food particles, grease, hair, and paper, many homeowners turn to chemical cleaners to remove the clog. Chemical drain cleaners can be poured down the drain and are intended to create a chemical reaction with the clog that breaks it down and allows water to flow freely. However, these products are not without risk and can damage your pipes, causing more costly repairs in the future.

The harsh chemicals in chemical drain cleaners can be damaging to your plumbing system, especially older pipes. They may cause corrosion and leaks from joints, or they can disintegrate plastic PVC pipes over time. In addition, they can be dangerous to your health if they come into contact with your skin or if you breathe in their fumes. Chemical drain cleaners can also be toxic to pets if they ingest them and can be harmful to the environment if they are washed down the drain and into waterways.

If you are tempted to use a chemical drain cleaner, be sure to follow the manufacturer’s instructions carefully. These cleaners typically require a specific amount to be poured down the drain in order to achieve the desired result. They must be poured slowly and steadily to avoid spillage and to ensure that the chemical reaction takes place in a controlled way. This is important because the corrosive chemicals can be very dangerous if they get on your skin or in your eyes. They must also be used in a well-ventilated area to prevent toxic fumes from building up.

Instead of using a chemical drain cleaner, try pouring hot water down the drain first. This will help to break up any solid debris and can be a much safer alternative to using corrosive chemicals in your home. Then, you can follow up with a drain cleaning solution such as baking soda and vinegar to clear out any remaining clogs. This is a natural alternative to chemical drain cleaners and can be just as effective for many clogs.

Hydro-Jetter

If your floor gets dirty, you mop it. If your bookshelf gets dusty, you dust it. When your drain pipes get dirty, though, you’ll need more than a drain snake to clean them. In many cases, a plumbing professional will use a tool called a hydro jet to clean the interior of your pipes. This method uses pressurized water streams to scour the walls of your pipe, eliminating most types of clogs and leaving your pipes in better condition.

To use a hydro jet, a plumber will insert a hose with a nozzle into the access point to your clogged drain or sewer line. The nozzle is attached to a water tank that’s pressurized up to 3500 psi, creating powerful water jets. The nozzle itself may be designed for specific types of clogs, such as hair or soap scum. The nozzle is then aimed at the blockage and fired. The high-pressure water will blast away the clog and may spray some backward, which can contain harmful bacteria and should be avoided with protective gear like goggles and gloves.

After a clog is removed, the plumber will check the lines for any further problems using a video camera. This will help them identify where the problem is and what caused it, so they can design a strategy to prevent it in the future. For example, a video inspection can reveal if a tree root has grown into the line and is causing a backup. The plumber can then choose the appropriate nozzle for this type of clog to prevent it in the future.

Residential sewer systems benefit greatly from hydro jetting services. These pipes can be difficult to access with a snake, but the water jets make short work of even the most stubborn clogs. In addition, the scouring action of the water jets can eliminate odor-causing food particles that may have lodged inside your drains.

Commercial and industrial drains also benefit from hydro jetting services, as their large size makes them challenging to reach with a snake or chemical cleaner. Often, restaurants and other food processing businesses experience fat, oil, and grease (FOG) build-up in their pipes that eventually leads to hard blockages. This can cause unpleasant odors to rise into their kitchens. Hydro jetting can easily remove these materials from the walls of a pipe and flush them into larger municipal sewer lines.

Enzymatic Foam Cleaner

Commercial drain cleaners are powerful solutions designed to tackle tough clogs in high-usage environments such as restaurants, hospitals, and apartment complexes. By breaking through severe blockages, these products help to ensure that drains remain functional and hygienic throughout business hours, saving businesses money by reducing plumbing costs. Commercial drain cleaners come in liquid, gel, and foam forms and can be poured directly down the drain. They generally work by dissolving the material causing the clog, such as grease, hair, or food particles. Different products use different mechanisms to break down these materials, including caustic chemicals, oxidizing agents, and enzymes and bacteria.

Before using a chemical drain cleaner, always try to clear a clog with a plunger or other simple tools. If these do not work, it’s time to move on to a more heavy-duty solution like a drain snake or hydro-jetting. If you’re looking for an environmentally friendly alternative to harsh chemicals, consider using an enzymatic drain cleaner. These products contain bacteria and enzymes that break down organic clogs, such as food waste, hair, or grease, and are safe for your pipes and the environment. These products may work slower than chemical cleaners, but they are safer for regular use and less toxic for human health.

It’s important to maintain a routine of regular maintenance with these products to keep your commercial drains in good condition. Performing a drain cleaning at least once every six months can reduce the risk of serious clogs and improve efficiency in your facility. Regularly using commercial drain cleaners can also save you the cost of professional services, such as snaking or hydro-jetting, which can be expensive and disruptive to your business.

Our Instant Power Professional Bio-Enzymatic Commercial Drain Maintainer is a non-toxic, non-corrosive product that uses enzymes to break down and remove hair, soap scum, paper, fats, oils, proteins, and more. It also prevents future clogs with a formula that inhibits buildup of organic matter, making it perfect for your business.

Baking Soda & Vinegar

Homemade drain cleaners using household products are a safe and effective solution for minor clogs. These natural solutions also help prevent clogs and are more environmentally friendly than chemical cleaners. They can be used as part of a regular maintenance routine to help keep pipes clear and healthy.

Baking soda and vinegar can be an effective DIY clog cleaner when used properly. This combination can lift and dissolve a variety of substances, including grease. For best results, this cleaning solution should be left in the drain overnight. The extended contact time allows the mixture to work more thoroughly and makes it easier to flush away with hot water the next day.

To clean a drain with baking soda and vinegar, first remove any standing water from the sink or tub. Pour one cup of distilled white vinegar down the drain. This will cause a reaction to occur, and the resulting foam can dislodge many types of clogs. Cover the drain with a cloth or drain plug to enhance the effectiveness of this treatment. After waiting a few minutes, pour a cup of baking soda down the drain and cover it again. This will create a second reaction and continue to dislodge blockages in the drain.

This solution is especially helpful for kitchen drains that can become clogged with food scraps and other organic debris. It is important to remember that vinegar is very acidic and can corrode some types of pipes over time, particularly older copper or brass pipes. To prevent damage to your pipes, use this solution as a last resort or in conjunction with other drain cleaning methods, such as an enzyme-based cleaner.

In addition to cleaning your drains, baking soda and vinegar can be used as an effective drain deodorizer. Simply sprinkle a small amount of baking soda over the bottom of your garbage disposal and turn on the drain to activate the mixture. This will eliminate odors and keep your kitchen drains smelling fresh and clean. For added benefit, consider implementing a regular drain maintenance routine that includes using natural cleaners to prevent clogs and a regular flushing of your drain with hot water.

What Is Junk Removal?

Jared Jennings Junk Removal , , , , ,

Junk removal companies specialize in hauling away large, bulky waste items that don’t fit in standard trash bins. They also offer dumpster rentals. These services are available to both businesses and homes.

Junk Removal

Most junk removal companies try to recycle and donate as much of the junk they collect as possible rather than just throwing it away. This is good for the environment and helps to reduce landfill waste.

Junk removal is a growing industry that involves the collection and disposal of unwanted items from homes and businesses. These services provide a useful service for people who are too busy or unable to transport junk themselves. They typically offer a two-step process of evaluating and removing junk, which saves time and money for their clients. They may also help people organize their junk and recycle items to reduce waste.

A growing trend in junk removal is the focus on eco-friendly disposal methods. Many junk removal companies take their environmental responsibilities seriously, and they prioritize recycling and donation over sending waste to landfills. These efforts are a good way to attract customers who want to support planet-friendly businesses.

To succeed in this business, you will need to plan carefully and budget for both fixed and variable costs. For example, you might need to purchase a truck and equipment, as well as pay for advertising and marketing. You should also set SMART goals to guide your business growth. These are goals that are specific, measurable, attainable, relevant, and time-bound. It is advisable to hire an accountant or bookkeeper to track your finances and keep records organized, which will be helpful at tax time.

The value of the junk removal industry is estimated to be around $3 billion, which is a substantial contribution to the country’s economy. This figure is not to be underestimated, and it highlights the importance of junk removal services in maintaining a clean and organized environment.

It is important to understand who your target audience is and what their needs are in order to cater your junk removal business to their preferences. For instance, you can specialize in servicing residential clients, commercial properties, or construction sites. This will help you tailor your services, pricing, and marketing strategies to meet the specific needs of these groups.

You should also ensure that your junk removal company has the necessary licenses and permits to operate in your area. This is important for your business, especially if you’re handling hazardous materials or chemicals. You might also need to obtain a special permit for transporting large loads, depending on the type of waste you’re collecting.

It’s a lucrative business

Junk removal is a lucrative business that can help you earn good money by helping people get rid of their unwanted clutter. It is also an environmentally friendly service that can reduce waste and help you save on garbage disposal costs. However, there are some things you should consider before you start your own junk removal business. First, you should research the local market to see what the competition is like. This will help you determine how to market your services.

Then, you should create a website for your junk removal business and post your services online. This will make it easier for customers to find and book your junk removal services. You should also create social media accounts to promote your junk removal business and share customer testimonials, success stories, and tips for proper junk disposal.

Creating a profitable junk removal company requires careful planning and execution of strategies to ensure long-term growth. A business plan is essential, as it will guide your decisions on hiring, marketing, and implementing operational changes. It is also important to set SMART goals that are specific, measurable, attainable, relevant, and time-bound.

Another important factor to consider is how to handle cash flow. It is important to keep track of your profits and expenses, so you can make smart choices about financing your business. You can do this by opening a small business bank account and creating a separate accounting system to manage your finances. You can also hire a bookkeeper or accountant to help you with this process.

To maximize the profitability of your junk removal business, you should focus on a niche market segment and offer specialized services. For example, you can target residential clients, commercial properties, and construction sites. Focusing on a niche segment will allow you to customize your services and pricing, which will appeal to potential clients.

The profitability of a junk removal business is dependent on many factors, including your location and the number of clients you serve. Choosing the right location will be crucial for your success, as it will help you reach your sales and profit goals. In addition, you should research local competition to determine how much demand there is for junk removal services in your area.

It’s environmentally friendly

While traditional trash removal involves dumping junk in landfills, the waste management industry is shifting towards eco-friendly junk disposal. This is because people are becoming more environmentally conscious and want to work with businesses that share their values. In addition, reducing the amount of waste that goes to landfills helps to reduce greenhouse gasses and prevents toxins from seeping into the soil as it breaks down.

Junk removal companies that prioritize recycling and donating items help to keep a large percentage of waste out of landfills. They also divert reusable items, like appliances and furniture, to charities and recycling centers. For example, Nixxit has a sorting warehouse in Oakland where workers donate usable items and recycle 80% of the junk they pick up. In addition, many junk removal services offer a variety of recycling options, including metals and paper.

Another way to reduce waste is to reuse items, such as glass jars or cardboard boxes, before disposing of them. In addition to reducing the volume of garbage that is sent to landfills, this method also saves money on new materials. Many junk removal companies offer a green recycling service that allows you to recycle your old and unwanted items. This process is very simple and convenient, and it’s an excellent option for minimizing your environmental footprint.

In addition to recycling, some junk removal services use advanced technology to improve the efficiency of their operations. For instance, some use conveyor belts that are equipped with sensors to detect different types of materials in real time. This technology streamlines the sorting process and ensures that different materials go to their appropriate processing streams.

When hiring a junk removal service, make sure you understand what type of junk they accept. For example, they may not take broken glass or hazardous materials, such as batteries, paint, and aerosol cans. It’s also important to check if they recycle yard waste and other organic waste. Those materials can be converted into nutrient-rich compost or energy through incineration and other Waste to Energy (WtE) processes. They can also be used for landscaping and mulching.

It’s convenient

Junk removal services make it easy for people to get rid of unwanted items. These companies pick up junk from homes and businesses, then dispose of it in a safe and environmentally friendly way. They also offer dumpster rentals, which can be a good choice for projects that require large amounts of junk removal. In addition to junk removal, these companies also recycle and donate items, which reduces the amount of waste that ends up in landfills. They can even pick up e-waste, which is a growing problem in the world today.

Most junk removal companies will charge a fee to remove and dispose of junk, but they can save you time and money in the long run. These services are useful for a variety of reasons, including cleaning up after a home renovation or preparing for an office move. They can also help you sort through your clutter and reclaim space in your home. They can also provide you with a free estimate for their service, so you know how much it will cost before they start working.

In general, junk removal services are able to remove any item that is not hazardous, such as old furniture, appliances, electronics, and scrap metal. However, some junk removal companies are more specialized than others, so it is important to choose the right one for your needs. Some specialize in appliance recycling, while others may have special equipment to handle hazardous waste. You can find out more about these companies by visiting their websites or calling them.

Junk removal companies typically use a truck to haul away junk, but some will also recycle or donate it. They will usually let you know where your junk is going, so you can feel confident that it will be recycled properly. If you’re worried about the environmental impact of junk removal, consider donating your old items to charity instead.

Junk removal companies are a great option for those who need to clear out their homes or businesses. These companies can remove any type of waste from a home or business, and they can even provide dumpsters for construction sites. They can also help you get rid of old furniture, computers, and other electronics. You can also hire them to clean up after natural disasters or illegal dumping.